AquaFinesse Spa Clean
Spa Clean from AquaFinesse is deep cleaning treatment for your spa. Its environmentally friendly formula removes biofilm from the plumbing and everywhere you can't see.
If you have noticed any slime around the water line, skimmer or jets, or if you've seen any unexplained green, black, brown or white flakes in the water, chances are that your spa is infected with biofilm. Biofilm is formed from the oil, grime and bacteria which is introduced into your spa. Over time, the bacteria binds it all together in a slimy film which can coat the inside of the plumbing of your spa. Once your spa has biofilm, it can be difficult to maintain proper sanitation of the water.
Spa Clean is perfect for deep cleaning the interior and pipe work of your spa during the 3 monthly water change over, and is also ideal for use when treating a new spa or swapping over from traditional sanitisers to AquaFinesse.
How to use
- Remove the filter and raise the chlorine level in you spa to between 3-5ppm before beginning the deep clean process.
- Ensure that all jets and air valves are set in the open position.
- Add the tablet to the basket above the removed filter, if possible in water over 32°C. If you want, you can also dissolve the tablet in a bucket with warm water before adding it to the spa water.
- Activate the pumps on full power for 20 minutes to allow a good flow.
- Repeat the pump activation process at least 2 to 3 times during the deep clean. Recommended treatment time is 6 to 12 hours, dependant on the severity of the problem.
- Once the treatment is complete, activate the pumps before emptying the spa, then rinse thoroughly with fresh water.
- Replace the filter, refill with fresh water and add Non chlorine shock powder or Active Oxygen.
- Resume maintenance with your usual water treatment.
Capacity
1 tablet
Countries delivered
We supply this product throughout the European Union, with the exception of Finland, Belgium, Luxembourg, the Netherlands, Cyprus, Malta, Ireland and the Balearic Islands.
