CMP Pro-Loc 400 jet body

This is the socket for the all of the CMP Pro-Loc 400 jets. It is attached to the spa shell and the jet is snapped-in. The fixing nut and the gasket are supplied.

The socket is clear, so you can combine massage and LED lighting (with the addition of LED port clip) as you wish.

The water flow through the socket draws in air through the Venturi effect, which adds bubbles to the water jet and increases the power of the massage. The air inlet of each nozzle is normally connected to a manifold, and then to a valve, so that the air/water mixture in the jets can be modified.

Despite very great similarities and identical dimensions, this socket is not interchangeable with the Typhoon 400 white model from CMP.

Dimensions
Drilling diameter : 66 mm
Diffuseur length : 108 mm
Face diameter : 80 mm

Connection
Water: 3/4 inch pipe
Air: 3/8 inch pipe

Part numbers
CMP : 29242-089-000