Gecko Hi-Limit sensor - S-Class/MSPA-MP

In stock
60,00€
incl. 20% VAT
Version
Quantity:  
Gecko Hi-Limit sensor - S-Class/MSPA-MP - Click to enlarge
Gecko Hi-Limit sensor - S-Class/MSPA-MP - Click to enlarge
Gecko Hi-Limit sensor - S-Class/MSPA-MP - Click to enlarge
Gecko Hi-Limit sensor - S-Class/MSPA-MP - Click to enlarge

This Gecko sensor provides a safety cut-off if the water temperature becomes too hot due to a defect elsewhere in the control system. It is designed for S-Class (SSPA-1 and SSPA-2) and MSPA-MP control systems.

It is also designed for the Hydro-quip range of systems, suitable for the 4/6200, 4/6220, 4/6230, 4/6330, 7500, 9700 series and EasyPak EP2000 series control systems.

This sensor has a little two-pin plug. The wires are typically green and purple in the Gecko version, and red and black in the HydroQuip version, but there are compatible sensors on the market in other colours.

Two versions of this sensor are used in control systems with integrated heaters: the 48 cm or 12" version (photo 1) or the 180 cm or 48" version (photo 2).

Dimensions
Cable length: 180 cm
Sensor diameter: 6.3 mm (1/4")

Part numbers
Gecko: 9920-400643, 9920-400446
HydroQuip: 34-0201D
Astrel: 98A540P011
Dimension One : 01560-81

This sensor can also replace the following Gecko models: 9920-400319, 9920-400435, 9920-400444*, 9920-400447*, 9920-400464, 9920-400490, 9920-400516, 9920-400523, 9920-400643, 9920-400685, 9920-400710*, 9920-400902, 9920-400903, 9920-401042, 9920-401340, 5-60-7034, 5-60-7037, 5-60-7040, 5-60-7045, 5-60-7047, 5-60-7232, 5-60-7059, 5-60-7257, 5-60-7258, 5-60-7327

* A small modification will be necessary if you have one of the sensors marked with an asterisk. Add a comment to your order to let us know, and we'll take care of it before shipping the new sensor to you.