Lo-Chlor Spa Leak Sealant 450 ml for spas
Use Leak Sealer to block small leaks in spas. It doesn't work on 100% of leaks, but it is often highly effective and an enormous time-saver compared to conventional repairs. It can be used for leaks in either the shell and/or internal plumbing system. Do not use this product on very large leaks, the spa should be losing no more than 2 cm of water per day).
How to use it
- Read the instructions first!
- Remove cartridge filters or bypass sand filters
- With the pumps running, add the recommended dose to the water
- Leak Sealer is very heavy. To avoid it settling on the floor off the spa, keep the water circulation and stir the water if necessary.
- Most leaks will have sealed within 3 hours. If your leak has slowed, but not stopped, continue to circulate the water for another 3 hours.
- When finished, stop the filtration and let the product settle to the bottom, where you can clean it out.
- Replace the filters
- For best results, drain the spa, and leave it empty for 24 hours while the Leak Sealer finishes curing.
Lo-Chlor Spa Leak Sealer should not be used when the hot tub water temperature is below 6°C, and it must not be used if your heater comes with a pressure switch, as it may block the orifice.
225 ml of Leak Sealer is the recommended dose for a 2000-litre spa
Volume
450 ml
Countries delivered
We supply this product throughout the European Union, with the exception of Finland, Belgium, Luxembourg, the Netherlands, Cyprus, Malta, Ireland and the Balearic Islands.
