LX Whirlpool GM-210 wet end seal
In stock
22,50€
incl. 20% VAT
This seal ensures that the water doesn't leak out of the pump wet end, along the motor spindle.
It comes in two parts: one mounts on the wet end and the other with a carbon or ceramic seal slots in behind the impeller.
The carbon seal will perform well with salt water and other situations where the water chemistry is less than perfect.
Dimensions (mm)
| Carbon/ceramic ring | Spring | |
| Ø Exterior | 35.4 | 41.5 |
| Ø Interior | 18.8 | 17.8 |
| Thickness | 9.1 | 20.3 |
Compatible LX Whirlpool Pumps
- JA35, JA50, JA75, JA100, JA120, JA150, JA200
- LP200, LP250, LP300
- WP200-II, WP250-II, WP300-II
- EA350, EA450
- DH1.0 depending on the pump (Please check the dimensions of the seal you are replacing. If the dimensions do not match, the entire wet end must be replaced.
- TDA35, TDA50, TDA75, TDA100, TDA200
- WTC50M
Part numbers
LX Whirlpool : SEAL-56WUA, GM-210
