Water ID PoolLab 2.0 Photometer electronic water tester

Convenient and easy to use, the PoolLab 2.0 from Water ID is a portable digital colour screen photometer, ideal for water analysis in spas and pools.

Capable of analysing three water parameters simultaneously thanks to its 3-compartment measuring chamber, the PoolLab 2.0 allows you to quickly test your water by simply immersing it in your spa. The photometer is supplied with a kit of tablets to measure chlorine level (free, combined and total), pH, total alkalinity and cyanuric acid (stabiliser).

There are a total of 24 different parameters (not all reagents are included) that can be measured, including calcium hardness, active oxygen or phosphate. Note that some parameters can only be measured in chamber 2 (see user manual).

The Pool Lab 2.0 has both Wi-Fi and Bluetooth connection to connect to the free LabCom® software and app. All the results of your measurements are sent to the free app, available for Apple and Android devices, to allow you to track all the values you have analysed during the season. The app also provides dosing recommendations based on the water treatment products entered, and depending on the size of your spa.

Finally, a free cloud service with which PoolLab 2.0 automatically synchronises data via Wi-Fi ensures that the software and the application always work with the same database.

The kit consists of:

• 1 PooLAB 2.0 photometer with Bluetooth and Wi-Fi (IP68 waterproof)
• 1 measuring chamber with 3 compartments (exchangeable)
• 20 Phenol Red tablets
• 20 DPD1 tablets
• 10 DPD3 tablets
• 10 Alkalinity-M ptablets (also called Total Alkalinity or TAC)
• 10 cyanuric acid (chlorine stabiliser) tablets
• 1 light protection cap
• 3 stirring rods in plastic
• 1 10 ml syringe
• 3 AA batteries
• 1 user manual

Part numbers
Water ID : PoolLAB 2.0